[Tig] Spirit Filters

Craig Nichols cnichols
Thu May 29 21:44:46 BST 2003


We got a roll of Spirit Filter material from:

For the filter roll which you can cut to the proper filter pad size (part #
GR150SB22.5 / $86.00) contact:
Manny U. Bettencourt
Freudenberg --- Filtration Division
T: (978)454-0461 x409
E: manny.bettencourt at fvna.com

We did this about 2 years ago, so I am not certain if price has remained the
same.  If you change your filter material on a regular basis, one roll will
last quite a while.

insert std. disclaimer

Craig Nichols
Ascent Media

-----Original Message-----
From: Wayne Veitschegger [mailto:w_veitschegger at ivchd.com]
Sent: Thursday, May 29, 2003 10:37 AM
To: tig at tig.colorist.org
Subject: [Tig] Spirit Filters


Ricky Ricamonte supports the tig.

Hi All,
Who is a good vendor for the white 'filter mat' material that is used in the
bottom of the Spirit?
Cheers,

Wayne Veitschegger
Chief Engineer
IVC High Definition Center
2777 Ontario Street
Burbank, CA  91504
Ph: 818-569-4949 Fax: 818-569-3659
w_veitschegger at ivchd.com


--
No marketing or advertising on the tig.  (help wanted ads excepted) 
Send such submissions to rob at calarts.edu
For contributions see http://tig.colorist.org the "make a donation" button
or http://colorist.org/tig3/info.html#money





More information about the Tig mailing list