[Tig] Dust and telecine

[Hugh Waters]

Aargh! No! surely not possible :-(  Tell me you are joking Stuart!

However the air into the scanning room comes from behind the building if I
recall, so maybe, just maybe it isn't as dreadful as it sounds. 

Mind you it would be interesting to see whether the filter system worked. 

Hugh

-----Original Message-----
From: tig-bounces at tig.colorist.org [mailto:tig-bounces at tig.colorist.org] On
Behalf Of Stuart Fyvie
Sent: 23 August 2006 22:12
Cc: tig at tig.colorist.org
Subject: Re: [Tig] Dust and telecine


TIG is supported by subscribers.
see http://tig.colorist.org for 
donation button interface.  Thanks to
Scott Klein, Glenn Chan, Hakan Toptas,
Roberta Thomas, Mike Seymour, Patricia Weese,
Rick Harding.
--

 
That wouldn't be the same facility I walked past a few months ago? The brand
new shiny Spirit visible from the street? And the builder outside with an
ANGLE GRINDER chiseling a giant groove into the pavement, dust ejecting
straight into the reception area?

Just wondering......

Stuart Fyvie
LipsyncPost London.

On 23 Aug 2006, at 13:39, Hugh Waters wrote:

> TIG is supported by subscribers.
> see http://tig.colorist.org for
> donation button interface.  Thanks to
> Scott Klein, Glenn Chan, Hakan Toptas,
> Roberta Thomas, Mike Seymour, Patricia Weese,
> Rick Harding.
> --
>
>
>
>> ... a silver lamé suit, with boots and mask to  match, would do
>> well to
> take care of client concerns regarding such dust.
>
> One of my London clients has adopted white cleanroom suits and  
> masks. Their
> scanner is located at the front of the building and a big glass  
> panel allows
> people in reception to see into the scanning room.
>
> When I recommneded they wear the wierd get-up there was,  
> understandably,
> some reluctance. But then everyone asked themselves "What message  
> does it
> send our clients? a)'These guys look stupid'  or b) 'These guys  
> CARE about
> film!'" it was a no brainer and the white overalls went on, face- 
> masks &
> hoods included.
>
> Just wish I'd thought of silver lame though! Come to think of it.  
> if I were
> a scanner manufacturer I'd issue freebie scanning room suits, with  
> BIG logos
> on of course! Much better than 'yet-another
> teeshirt-which-produces-fibre-&-static'
>
> Hugh
> -----------------------------
> Hugh James Waters
> Waters Technical Services
> 07801 053248
> 01453549048
> hugh at hjwaters.co.uk
> www.hjwaters.co.uk
>
>
> _______________________________________________
> No personal abuse; absolutely no advertising or marketing on the  
> main TIG mailinglist; no multiple-question "surveys" of  
> subscribers without permission; please help to maintain a high  
> signal-to-noise ratio on the TIG.
> Tig mailing list
> Tig at tig.colorist.org
> http://tig.colorist.org/mailman/listinfo/tig


_______________________________________________
No personal abuse; absolutely no advertising or marketing on the main TIG
mailinglist; no multiple-question surveys of subscribers without permission;
please help to maintain a high signal-to-noise ratio on the TIG.
Tig mailing list
Tig at tig.colorist.org
http://tig.colorist.org/mailman/listinfo/tig