graham.collett at btconnect.com
Tue Aug 7 10:33:14 BST 2007
leaving the eht off and the crt on can only damage the crt. either all on or all off depending on your use.
From: tig-bounces at tig.colorist.org on behalf of Dave Sweet
Sent: Sun 05/08/2007 13:46
To: Ricardo Acosta
Cc: tig tig
Subject: Re: [Tig] Ursa
TIG portal: http://tig.colorist.org/wiki3
Mike Williams supports the TIG.
If the auto alignment really does end up looking OK after a few tries
I'd say TWIGI has a few problems to begin with. At least that's the
most suspect if the alignment eventually lands correctly. If the CRT
is getting older, it's going to push twigi and scandal at they're
limits. Power supply can cause issues too.
One thing to try...
Do you power down your CRT over night as well? The general school of
thought is to "turn off" the EHT while leaving the CRT on (low power)
overnight. However lately, I've been turning off BOTH the EHT and the
CRT overnight and the stability and auto-align have been excellent
Dave Sweet - Colorist
Pixel Farm, Inc.
On Aug 3, 2007, at 10:18 AM, Ricardo Acosta wrote:
> TIG portal: http://tig.colorist.org/wiki3
> Mike Williams supports the TIG.
> Hi:What could be the reason if the TAF looks different every day? I
> have an Ursa Diamond with Twiggy and Scandal. I have to autoaling
> several times until TAF looks ok! My CC is a daVinci 888 DUI.Thank
> Ricardo Acosta, Colorista.Telecine de Venezuela, Caracas.
> Express yourself instantly with MSN Messenger! Download today it's
> No personal abuse; absolutely no advertising or marketing on the
> main TIG mailinglist. Emergency
> tig contact address is rob (at) calarts.edu
> Tig mailing list
> Tig at tig.colorist.org
No personal abuse; absolutely no advertising or marketing on the main TIG mailinglist. Emergency
tig contact address is rob (at) calarts.edu
Tig mailing list
Tig at tig.colorist.org
More information about the Tig