[Tig] HD SD colour space

[woz]

I suppose it depends by which method you convert (you did mean convert and 
not clone?) it to SD. I'm guessing that you are using the downconverted 
output of a VT?
I would have expected that any SD 601 compliant output on a VT would by 
definition have the correct colour space, or it wouldn't be 601 compliant? 
But I haven't checked yet. Have you tried asking Sony?
If you have a legaliser you could put some appropriate test sigs  through 
the deck and switch it in and out to see if there is any difference.
(That was a long way of saying I don't know!)
woz

----- Original Message ----- 
From: "simon astbury" <simonastbury at hotmail.com>
To: <tig at tig.colorist.org>
Sent: Friday, February 02, 2007 5:05 PM
Subject: [Tig] HD SD colour space


> TIG is supported by subscribers.
> see http://tig.colorist.org for  donation button interface.  Wiki 
> available
> at http://www.colorist.org/wiki3
> ====
>
>
>
>
> Hi all
>
> I have a query about down converted pictures. When one clones an HD master 
> to SD should you pass it through a legaliser, because HD and SD colour 
> space are different?
>
> Thanks
>
> Simon Astbury
>
> _________________________________________________________________
> Click Here To Find Your Perfect Match This Valentines! 
> http://msnuk.match.com/
>
>
> _______________________________________________
> No personal abuse; absolutely no advertising or marketing on the main TIG 
> mailinglist.  Help to maintain a high signal-to-noise ratio on the TIG.
> Tig mailing list
> Tig at tig.colorist.org
> http://tig.colorist.org/mailman/listinfo/tig