[Tig] (no subject)

[Gustavo Gaiarsa]

Ricardo,

The telecine can't control the G5, there's no "VTR Mode" in Final  
Cut. You could try the opposite, control the telecine through the G5,  
but I think there's no "machine control template" ready for this and  
it would be a major headache.

The only way I know to do this is to digitize in FCP without timecode  
and then change the timecode and tape name of the clip to the  
timecode and source name you need, but i'm not sure if doing it this  
way he'll be able to have a consistent EDL or Cut List, he should  
proceed some tests before going this way.

Also you will not be able to output a Flex file this way because it  
depends on controlling the VTR and stablishing a timecode in order to  
generate the info needed for the file. The turnaround for this issue  
would be making a simultaneous output to tape and to the FCP, so the  
pulldown cadence of the tape will be the same you'll have in the FCP.

best,

Gustavo Gaiarsa
post-producion supervisor
São Paulo - Brazil
phone / fax +5511.3061.0736
mobile +5511.8132.1516
Nextel ID 55*1*48726
skype: gu_gaiarsa
gustavo at finaliza.art.br
http://www.finaliza.art.br


Em 28/11/2007, às 12:49, Ricardo Acosta escreveu:

> Thanks to Dave Corbitt for supporting the TIG.
>  ====
>
>
> Hello:
> I have a client that wants to digitize dailies directly to a Mac G5  
> from the telecine and pull Flex Files from the TLC. Can the daVinci  
> Renaissance 888 TLC2 editor control the G5 as if it were a tape  
> machine?
> I would appreciate any information on the matter.
> Best regards:
>
>
>
> Ricardo Acosta, Colorista.
> Telecine de Venezuela, Caracas.
>
>
> _________________________________________________________________
> Connect to the next generation of MSN Messenger
> http://imagine-msn.com/messenger/launch80/default.aspx?locale=en- 
> us&source=wlmailtagline
> _______________________________________________
> No personal abuse; absolutely no advertising or marketing on the  
> main TIG mailinglist.  Emergency
> tig contact address is rob (at) calarts.edu
> Tig mailing list
> Tig at tig.colorist.org
> http://tig.colorist.org/mailman/listinfo/tig
>