[Tig] DVW 500 VITC question

[Jeff Booth]

Hi Rob,

Sounds like you've got the VITC turned off on the recorder and are recording stationary VITC from the source.

As you have the VITC switched on (under front panel) maybe you should check the setup menu to make sure you are recording VITC on the correct lines?

Just a shot in the dark

Jeff
> 
> From: Rob Lingelbach <roblingelbach at gmail.com>
> Date: 2008/02/13 Wed AM 10:07:22 GMT
> To: Group Internet Telecine <tig at colorist.org>
> Subject: [Tig] DVW 500 VITC question
> 
> TIGNABFS08 - NAB for 2008
> http://colorist.org/wiki3/index.php/TIGNABFS08
> Thanks to The Chimney Pot for support in 2008
>  ====
> 
> 
> I have a DVW500/P D-Beta and don't have the operation manual. The deck
> is recording ok with LTC and the VITC indicator is illuminated. In jog
> however the T/C display on the deck is frozen at a random number and
> doesn't increment when jogging. This indicates to me that VITC isn't
> being recorded properly. The switches underneath the panel are
> VITC=on, INT, REC RUN, AUTO, and Setup=2.
> 
> Most likely I need to set a function in the Menu numerics to enable
> VITC, can someone advise which menu items I need to set?
> 
> thanks in advance.
> 
> --
> Rob Lingelbach
> rob at colorist.org   http://www.colorist.org
> 
> 
> _______________________________________________
> No personal abuse; absolutely no advertising or marketing on the main TIG mailinglist.  Emergency
> tig contact address is rob (at) calarts.edu
> Tig mailing list
> Tig at tig.colorist.org
> http://tig.colorist.org/mailman/listinfo/tig
> 

-----------------------------------------
Email sent from www.virginmedia.com/email
Virus-checked using McAfee(R) Software and scanned for spam