[Tig] MK3 Part Number Query

Mark mark.r.knights at btinternet.com
Thu Mar 6 18:39:21 GMT 2008


Lou Gardiner is still alive and kicking and still has a couple of workshops
in Bristol.
Aardman are keeping him busy these days.
MK 111 spares were a speciality of his.

Mark









On 6/3/08 07:50, "Steve Roberts - Post Production" <steve.roberts at bbc.co.uk>
wrote:

> Get your entry into the TIGNABFS08 - NAB for 2008
> http://colorist.org/wiki3/index.php/TIGNABFS08
> ====
> 
> 
> 
> If anyone is still looking, don't worry - I got our mechanical engineer
> to knock up a replacement part from scratch yesterday. When I joined the
> BBC in '87 we had a large mechanical department and this sort of thing
> would have been routine. Now we have one guy left who was part of that
> department and a tiny workshop under constant threat of closure... I
> hate to think how we're goig to be able to continue to maintain these
> telecines for much longer...
> 
> Steve
> 
> Steve Roberts | Senior Engineer | BBC Resources
> Room 3501 | BBC Television Centre | Wood Lane | London | W12 7RJ
> 
> T: +44 (0)20 857 64556 | F: +44 (0)20 857 61639
> http://www.bbcresources.com
> BBC Resources Limited
> Registered Number 3593793 England
> Registered Office: Television Centre, Wood Lane, London W12 7RJ
> 
> 
> 
> -----Original Message-----
> From: tig-bounces at tig.colorist.org [mailto:tig-bounces at tig.colorist.org]
> On Behalf Of Steve Roberts - Post Production
> Sent: 05 March 2008 10:14
> To: tig at tig.colorist.org
> Subject: [Tig] MK3 Part Number Query
> 
> Get your entry into the TIGNABFS08 - NAB for 2008
> http://colorist.org/wiki3/index.php/TIGNABFS08
> ====
> 
> 
> Does anyone know the part number of the spring-loaded toggle assembly
> that sits on the end of the spool hubs on the later MK3s - it's the bit
> you pull out and flip over to secure the core and its spacer to the
> spool plate. On earlier ones it was simple bit of metal, but later on it
> was a spring-loaded toggle. I have a broken one and need to approach
> Cintel for a possible replacement and from past experience trying to ask
> them to find mechanical parts without a part number is nigh-on
> impossible. The actual broken bit is the swivel that pivots on the end
> of the motor shaft, the spring-loaded toggle part should remount onto a
> new one of these.
> 
> Thanks,
> 
> Steve
> 
> Steve Roberts | Senior Engineer | BBC Resources
> Room 3501 | BBC Television Centre | Wood Lane | London | W12 7RJ
> 
> T: +44 (0)20 857 64556 | F: +44 (0)20 857 61639
> http://www.bbcresources.com
> BBC Resources Limited
> Registered Number 3593793 England
> Registered Office: Television Centre, Wood Lane, London W12 7RJ
> 
> 
> http://www.bbc.co.uk/
> This e-mail (and any attachments) is confidential and may contain
> personal views which are not the views of the BBC unless specifically
> stated.
> If you have received it in error, please delete it from your system.
> Do not use, copy or disclose the information in any way nor act in
> reliance on it and notify the sender immediately.
> Please note that the BBC monitors e-mails sent or received.
> Further communication will signify your consent to this.
> 
> 
> _______________________________________________
> No personal abuse; absolutely no advertising or marketing on the main
> TIG mailinglist.  Emergency tig contact address is rob (at) calarts.edu
> Tig mailing list Tig at tig.colorist.org
> http://tig.colorist.org/mailman/listinfo/tig
> 
> http://www.bbc.co.uk/
> This e-mail (and any attachments) is confidential and may contain personal
> views which are not the views of the BBC unless specifically stated.
> If you have received it in error, please delete it from your system.
> Do not use, copy or disclose the information in any way nor act in reliance on
> it and notify the sender immediately.
> Please note that the BBC monitors e-mails sent or received.
> Further communication will signify your consent to this.
> 
> 
> _______________________________________________
> No personal abuse; absolutely no advertising or marketing on the main TIG
> mailinglist.  Emergency
> tig contact address is rob (at) calarts.edu
> Tig mailing list
> Tig at tig.colorist.org
> http://tig.colorist.org/mailman/listinfo/tig





More information about the Tig mailing list