[Tig] Spirit brightness in shuttle

[Nichols Craig]

This is the most common cause of symptom you described.  The other is
dirt in optics AND an old lamp.  

Disclaimer - I work for Thomson Grass Valley 
Kind Regards,
Craig

Craig Nichols
Sr. Support Engineer - Digital Film Applications
800-549-8949 24 hour Tech Support (Americas)
Craig.Nichols at Thomson.net
www.ThomsonGrassValley.Com

-----Original Message-----
From: tig-bounces at tig.colorist.org [mailto:tig-bounces at tig.colorist.org]
On Behalf Of Rob Lingelbach
Sent: Tuesday, May 06, 2008 11:54 PM
To: Jeff Booth
Cc: tig at tig.colorist.org
Subject: Re: [Tig] Spirit brightness in shuttle

1850 subscribers as of May 2008
Bob Campbell supports the TIG
http://colorist.org/wiki3/
 ====


thanks to Jeff and all who replied.   changing the lamp cured the  
problem, it was at the end of its life.

On May 6, 2008, at 9:10 PM, Jeff Booth wrote:

> I would guess that the lamp assembly is full of crud.

--
Rob Lingelbach
rob at colorist.org    http://www.colorist.org/robhome.html




_______________________________________________
No product marketing on the main TIG mailinglist.
Emergency contact: rob (at) nccom.com
Tig mailing list
Tig at tig.colorist.org
http://tig.colorist.org/mailman/listinfo/tig