[Tig] uneven 5242 stock for ARRILaser magazine

[Marc Brown]

I also have received dished reels from Kodak, I would advise against trying to force them flat for fear of scratching the neg. The only solution is to rewind the stock again, power rewinds come in very handy for this..

Marc Brown
Digital Film Services
Alphacine
Seattle, Wa 98121
206-682-8230
http://alphacine.com/
 

-----Original Message-----
From: tig-bounces at tig.colorist.org
[mailto:tig-bounces at tig.colorist.org]On Behalf Of LEO
Sent: Sunday, May 11, 2008 9:12 AM
To: tig at tig.colorist.org
Cc: 'shuo pan'
Subject: [Tig] uneven 5242 stock for ARRILaser magazine


1850 subscribers as of May 2008
Interface Media Group supports the TIG
http://colorist.org/wiki3/
 ====


We got this strange batch of 2000feet 5242 stock, they are not even as what we used to have. In a darkroom, by laying them down on a table, and touching the top side of them, some circles are 3 to 5 cm higher than others, and some are lower. That causes too much friction in our ARRIlaser feed magazine, of which the motor can not drive the stock rotate. Does anyone know how can we fix that? I try to push the higher parts in, but the stock is still not loose, this doesn’t work.

Liao
_______________________________________________
No product marketing on the main TIG mailinglist.
Emergency contact: rob (at) nccom.com
Tig mailing list
Tig at tig.colorist.org
http://tig.colorist.org/mailman/listinfo/tig

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.16/1428 - Release Date: 5/12/2008 7:44 AM
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.16/1428 - Release Date: 5/12/2008 7:44 AM