[Tig] Slight Jerks Several Frames Prior To Cuts In Pan & Scan Edit For Video
Craig.Dingwall at nfsa.gov.au
Thu May 20 01:44:59 BST 2010
Could be light notches in the film component.
Rob Lingelbach <rob at colorist.org>
Sent by: tig-bounces at colorist.org
20/05/2010 10:36 AM
"John A. Mozzer" <jamworks at earthlink.net>
tig at colorist.org
Re: [Tig] Slight Jerks Several Frames Prior To Cuts In Pan & Scan Edit
Sohonet http://www.sohonet.co.uk sponsors the TIG.
Film Systems supports the TIG.
On May 19, 2010, at 5:00 PM, John A. Mozzer wrote:
> More often than not, the entire image jerks ever-so-slightly to the
> right several frames prior to the cut.
Is the shift always to the right? can you jog the tape and let us know
the frame offset, and whether or not it happens on every cut, or just
on every cut that has a pan change?
rob at colorist.org
More information about the Tig